H2SO4-H2O中硝酸铜对脱硫石膏晶须生长的影响

以处理后的脱硫石膏为原料,在H₂SO₄-H₂O体系中以Cu(NO₃)₂为晶形控制剂采用水热法制备脱硫石膏晶须,探讨了Cu(NO₃)₂对脱硫石膏晶须生长的影响机理。结果表明:Cu(NO₃)₂对脱硫石膏有明显促溶作用,其中Cu²⁺可减小溶液中各离子的活度系数,使溶液中的Ca²⁺浓度增大。NO^-₃通过静电作用在Ca²⁺周围聚集并对SO^2-₄产生屏蔽作用,导致脱硫石膏继续溶解并使Ca²⁺和SO^2-₄的浓度处于相对稳定状态,有利于半水脱硫石膏晶体的形核与生长。此外,Cu²⁺还可在晶须的生长过程中选择性吸附在晶须表面,生成CuSO₄,促进了脱硫石膏的结晶生长,最终在Cu(NO₃)₂用量为2.0%(质量分数)时制备的脱硫石膏晶须长径比约为73。     

CRISPR-Cas12a System for Biosensing and Gene Regulation

Clustered regularly interspaced short palindromic repeats (CRISPR) is a promising technology in the biological world. As one of the CRISPR-associated (Cas) proteins, Cas12a is an RNA-guided nuclease in the type V CRISPR-Cas system, which has been a robust tool for gene editing. In addition, due to the discovery of target-binding-induced indiscriminate single-stranded DNase activity of Cas12a, CRISPR-Cas12a also exhibits great promise in biosensing. This minireview not only gives a brief introduction to the mechanism of CRISPR-Cas12a but also highlights the recent developments and applications in biosensing and gene regulation. Finally, future prospects of the CRISPR-Cas12a system are also discussed. We expect this minireview will inspire innovative work on the CRISPR-Cas12a system by making full use of its features and advantages.     

Kinetic study of hydrogen sulfide decomposition on Pt(111) surface

In this work, kinetic of H₂S conversion to H₂ molecule on the surface of Pt(111) is studied using kinetic Monte Carlo simulation. The results of simulation were fitted to the experimental temperature-programed desorption spectra. The good agreement between the empirical and the simulated data confirms the proposed mechanism and kinetic data (activated energies and pre-exponential factors). The influence of variables such as temperature and concentrations of H₂S and H₂ on the overall results of hydrogen production is studied. The condition is proposed in which the best yield of reaction at minimum temperature is obtained. Results show that platinum is a perfect catalyst for converting H₂S to H₂ and it has a perfect performance (98%) after 5 μs at low temperature of 227°C.     

Kinetics studies of 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol,and 2,4,4-trimethyl-1-pentanol with chlorine atoms: Photooxidation mechanism of 2,4,4-trimethyl-1-pentanol

The rate constants for the reaction between chlorine atoms and either 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, or 2,4,4-trimethyl-1-pentanol at 298 K were determined using the relative method with 2-butanol and 1-pentanol as reference compounds. The values obtained for 5-methyl-2-hexanol, 2,2-dimethyl-3-hexanol, and 2,4,4-trimethyl-1-pentanol (k × 10¹⁰ cm³ molec⁻¹ s⁻¹) were, respectively, (2.64 ± 0.5), (2.72 ± 0.5), and (2.50 ± 0.4), in agreement with the values of the rate constants reported in bibliography for similar alcohols and the values estimated by structure activity relationship methods. The photooxidation products of 2,4,4-trimethyl-1-pentanol initiated by chlorine atoms were identified (formaldehyde, 2-propanone, 2,2-dimethyl propanal, 4,4,-dimethyl-2-pentanone, and 3,3-dimethylbutanal), and the reaction mechanism was determined.     

Kinetic modeling of ZnO-rGO catalyzed degradation of methylene blue

Photodegradation of organic pollutants strongly depends on design of metal oxide semiconductor photocatalysts. Graphene, if composited with ZnO, can effectively enhance its photocatalytic performance for the eradication of pollutants from aqueous medium. Here in, ZnO-rGO is reported as highly active catalyst for degradation of methylene blue. A 200-mg/L solution of methylene blue dye was completely degraded within 1 h in comparison to 74% and 56% degradation over ZnO and rGO, respectively. The commonly used mechanisms of heterogeneous catalytic reactions, the Langmuir-Hinshelwood mechanism, and the Eley-Rideal mechanisms, were used to describe the reaction kinetics. The Langmuir-Hinshelwood mechanism was found as more favorable in this study. Apparent activation energy, E_ap, true activation energy, E_T, entropy, ΔS, and enthalpy, ΔH were calculated as 36.2 kJ/mol, 13.1 kJ/mol, 197.5 J/mol, and 23.1 kJ/mol, respectively.     

Experimental and kinetic modeling study of the oxidation of cyclopentane and methylcyclopentane at atmospheric pressure

Cyclopentane and methylcyclopentane oxidation was investigated in a jet-stirred reactor at atmospheric pressure, over temperatures ranging from 900 to 1250 K, for fuel-lean, stoichiometric, and fuel-rich mixtures at a constant residence time of 70 ms. The initial mole fraction of both fuels was kept constant at 1000 ppm. The reactants were highly diluted by a flow of nitrogen to ensure thermal homogeneity. Samples of the reacting mixture were analyzed online and off-line by Fourier transform infrared spectroscopy and gas chromatography. A detailed kinetic mechanism consisting of 590 species involved in 3469 reactions was developed, and simulation results were compared to these new experimental data and previously reported ignition delays. Reaction pathways analysis as well as sensitivity analyses were performed to get insights into the differences observed during the oxidation process of cyclopentane and methylcyclopentane.     

Defining the Scope of the Acid-Catalyzed Glycosidation of Glycosyl Bromides

Following the recent discovery that traditional silver(I) oxide-promoted glycosidations of glycosyl bromides (Koenigs–Knorr reaction) can be greatly accelerated in the presence of catalytic TMSOTf, reported herein is a dedicated study of all major aspects of this reaction. A thorough investigation of numerous silver salts and careful refinement of the reaction conditions led to an improved mechanistic understanding. This, in turn, led to a significant reduction in the amount of silver salt required for these glycosylations. The progress of this reaction can be monitored by naked eye, and the completion of the reaction can be judged by the disappearance of characteristic dark color of Ag₂O. Further evidence on higher reactivity of benzoylated α-bromides in comparison to that of their benzylated counterparts has been acquired.     

Enhanced Operational Durability of Thermally Activated Delayed Fluorescence-Based Organic Light-Emitting Diodes with a Triazine Electron Transporter

In organic light-emitting diodes (OLEDs) based on materials that show thermally activated delayed fluorescence (TADF), the internal quantum efficiency of 100 % can be obtained without using phosphorescence-based organometallics that contain rare metals. Therefore, with TADF-based emitters, it is possible to fabricate high-performing OLEDs at a lower cost. However, compared with fluorescence- and phosphorescence-based OLEDs, an understanding of degradation mechanisms in TADF-based OLEDs is still insufficient for future commercialization. In particular, it is widely recognized that the development of electron transport materials is crucial for improving OLED characteristics, especially driving voltages and operational durability. In this study, it was demonstrated that the operational durability of TADF-based OLEDs was greatly improved by introducing a triazine-based material of 2,4,6-tris(1,1′-biphenyl-4-yl)-[1,3,5]triazine (pT2T) as a hole-blocking layer (HBL) compared with a conventional HBL material of 2,4,6-tris(biphenyl-3-yl)-[1,3,5]triazine (T2T). Several experiments were carried out to make the reasons of the improved durability clearer, and attributed the improved durability to the shift of a carrier recombination zone from the emitting layer/HBL interface and the suppressed formation of excited-state quenchers in the pT2T HBL, because of the higher electron mobility of pT2T and the better stability of its radical anion state.     

A Mechanistically and Operationally Simple Route to Metal–N-Heterocyclic Carbene (NHC) Complexes

We have been puzzled by the involvement of weak organic and inorganic bases in the synthesis of metal–N-heterocyclic carbene (NHC) complexes. Such bases are insufficiently strong to permit the presumed required deprotonation of the azolium salt (the carbene precursor) prior to metal binding. Experimental and computational studies provide support for a base-assisted concerted process that does not require free NHC formation. The synthetic protocol was found applicable to a number of transition-metal- and main-group-centered NHC compounds and could become the synthetic route of choice to form M–NHC bonds.     

Magnetic field as a means to identify initiating reaction in oxidation of organic substances with molecular oxygen

1. Download : Download high-res image (77KB)
2. Download : Download full-size image